PoE+ Indoor Wall Mount IP Speaker with LCD, LED Flashers

The AtlasIED IP-SDMF-72 is an indoor wall-mount IP speaker designed to combine network-based audio, talkback communication, an LCD, and LED flashers in one coaxial loudspeaker assembly. Its 8-inch low-frequency driver and 1-inch high-frequency driver cover a specified frequency range of 86Hz to 15.5kHz. An RJ-45 connector supports network integration, while 802.3at power provides a maximum power rating of 25 watts. The speaker also includes a powder-coated steel grille and supports static configuration through an HTTP graphical user interface.

Ideal Use Cases

The IP-SDMF-72 is suited to indoor environments that need audible communication supported by visual information and attention signals. Its integrated LCD and LED flashers give system designers multiple communication methods at a single wall location. Talkback capability supports two-way interaction rather than limiting the unit to one-way announcements. With an average sensitivity of 98dB SPL and specified 105-degree dispersion at the 2kHz octave band, the speaker is designed to distribute clear, effective communication across its coverage area. These features make it appropriate for IP communication applications in which spoken messages, displayed information, and visible flashers need to operate together.

Why Choose This Model

This model brings several normally separate communication functions into one indoor wall-mount design. The coaxial driver arrangement combines an 8-inch low-frequency section with a 1-inch high-frequency section, providing a stated response from 86Hz through 15.5kHz. The speaker has a 25-watt maximum power rating under 802.3at and an integrated amplifier rated at 15 watts total power. Its primary speaker output is specified for 8 ohms. Network connectivity uses an RJ-45 connector, giving installers a clearly defined physical interface for IP deployment. The included LCD, LED flashers, and talkback functionality distinguish it from a basic network loudspeaker intended only for audio playback.

Installation and Integration

The IP-SDMF-72 measures 14.37 inches high, 12.87 inches wide, and 3.42 inches deep, equivalent to 365 x 327 x 87mm. Three identified enclosure configurations support different wall-installation approaches: the IP-FEST-SD for flush in-wall mounting, the IP-SEST-SD for straight surface mounting, and the IP-SEA-SD for slanted on-wall mounting. These options allow the speaker format to be matched to the intended wall position. Static registration is handled through an HTTP GUI for static configuration. The RJ-45 connection and 802.3at power specification consolidate the primary network and power requirements around a PoE+ installation.

Performance Highlights

Audio performance centers on a coaxial architecture with separate low- and high-frequency driver sizes. The specified 86Hz to 15.5kHz frequency response covers the operating range of the system, while the average sensitivity is rated at 98dB SPL. Dispersion is specified at 105 degrees using the 2kHz octave band and -6dB points. The 25-watt maximum power rating is paired with 802.3at operation, and the integrated amplifier is rated for 15 watts of total power. A powder-coated steel grille protects the speaker assembly. The product is also listed to safety standard 60950-1.

What Makes It Different

The defining feature set is the combination of an IP coaxial loudspeaker, talkback, LCD, and LED flashers in a single wall-mounted product. This allows the IP-SDMF-72 to address audible, visible, and two-way communication requirements without describing the unit solely as a conventional speaker. Three enclosure model options provide flush, straight surface, or slanted mounting configurations. The HTTP GUI for static setup gives administrators a specified configuration path, while RJ-45 connectivity provides the network interface. The result is a focused communication endpoint with both audio performance specifications and integrated display and signaling capabilities.

Final Assessment

The AtlasIED IP-SDMF-72 is a purpose-built indoor IP communication speaker for installations requiring more than audio alone. Its 8-inch and 1-inch coaxial drivers, 98dB average sensitivity, 105-degree dispersion, talkback support, LCD, and LED flashers form a well-defined feature set. PoE+ operation under 802.3at, RJ-45 connectivity, HTTP-based static configuration, and three compatible mounting approaches support structured integration. The product carries a 60-month warranty from the date of purchase and has a listed shipping weight of 6.37 pounds, or 2.89kg.