LUTRON HW-RPM-4A-120 - Remote Power Module
Questions or volume pricing? Call 800-919-6548
Professional Transparency: Shipping charges, delivery timing, and warranty coverage vary by destination and integration requirements. For bulk procurement or government pricing, call 800-919-6548 or email orders@robertsonav.com.
Filling a HomeWorks remote power panel? The Lutron HW-RPM-4A-120 puts four dimming circuits on one module that sits in the panel and talks to the system through a module interface.
Robertson AV can quote the module count for a whole panel schedule, or for every panel in a project.
Key Features
- Four dimmable outputs: Four circuits per module, each rated 10 A, with a 16 A total module rating
- Handles common load types: Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold-cathode and Lutron two-wire fluorescent loads
- Stable light levels: RTISS-TE trailing-edge technology compensates for line-voltage changes
- Easy addressing: Manual rotary address switch and a diagnostic LED for communications
- Safe servicing: Air gap provided when all four circuits are off, with manual override on the module
- Quiet to run: Passive cooling with EMI/RFI suppression circuitry
Ideal For
- Whole-home lighting control: panel-based HomeWorks systems
- Integrators: repeatable module for multi-panel jobs
Lutron HW-RPM-4A-120 HomeWorks Adaptive Dimming Remote Power Module Specifications
| Specification | Details |
|---|---|
| Physical | |
| Dimensions (W x H) | 3-7/8 x 7 in (99 x 178 mm) |
| Additional Features | |
| Product Type | HomeWorks remote power module, adaptive dimming |
| Number of Outputs | 4 |
| Operating Voltage | 120 V~, 50/60 Hz |
| Load Types | Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold-cathode, Lutron two-wire fluorescent |
| Minimum Load | 10 W per output |
| Maximum Load | 10 A per output; 16 A per module |
| Dimming Technology | RTISS-TE (trailing edge) |
| Heat Output (Fully Loaded) | 90 BTU/hour |
| Cooling | Passive |
| Operating Temperature | 32 to 104°F (0 to 40°C), 0-90% humidity non-condensing; indoor use only |
| Addressing | Manual rotary switch (uses 1 of 8 module addresses per module interface) |
| Regulatory Approvals | UL, CSA, NOM |
| General | |
| Brand | Lutron |
| Model | HW-RPM-4A-120 |
| UPC | 027557236249 |
Specifications are verified against the Lutron manufacturer data sheet (October 2026) and may change without notice. Confirm critical requirements with Lutron before ordering.
Warranty & Support
- Lutron limited warranty: Covered by Lutron’s limited warranty; terms at lutron.com/warranty
Planning a multi-room or multi-site install? Request a quote from Robertson AV for 5 or more units, or call us at 800-919-6548 or email orders@robertsonav.com. Free ground shipping on U.S. orders. Schools, businesses, government agencies and houses of worship: ask us about project and quantity pricing.
Must be installed in a HomeWorks remote power panel and connected to a module interface in the same enclosure; the communication harness is included. LED loads are not a supported load type under UL 508.
Planning your purchase
Planning an order for LUTRON HW-RPM-4A-120 - Remote Power Module? Reference SKU HW-RPM-4A-120; RAV21279 when requesting a RobertsonAV quote. Include quantities, delivery location, and project requirements so the team can confirm configuration, compatibility, shipping arrangements, and applicable return terms before purchase.
Shipping and return termsProduct Quote
Request a Quote
Need volume pricing, a formal quote for procurement, or a lead-time check on LUTRON HW-RPM-4A-120 - Remote Power Module? Send the details and a specialist replies with pricing and availability.
Customer Reviews
No reviews yet for this product.



