Mustang Pro Ceiling Mount Back-to-back Kit MPCDL75U; CA2; MPE3

Ideal Use Cases

The Mustang Professional MPCD-L75U-36 is a ceiling display mount kit designed for a back-to-back television configuration. It accommodates TVs from 37 to 75 inches, making it appropriate when two compatible displays need to face in opposite directions from a shared ceiling-mounted installation. The listed kit references the MPCDL75U, CA2, and MPE3 components.

Selection should be based on three documented compatibility points: display size, combined mounting load, and VESA pattern. The televisions must fall within the stated 37- to 75-inch range, the installation must remain within the 300 lb load rating, and each mounting interface must be compatible with the maximum 723 x 501 mm VESA pattern.

Why Choose This Model

This model brings the essential parts of a back-to-back ceiling mounting configuration together under SKU MPCD-L75U-36. Its 300 lb load rating provides a clearly defined capacity for evaluating the proposed displays and mounting arrangement. The broad 37- to 75-inch display range also allows the same model to be considered for several television sizes, provided every other compatibility requirement is satisfied.

The published maximum VESA pattern is 723 x 501 mm. That specification gives installers a concrete mounting-interface limit to compare against the hole pattern on each television. Screen size alone does not establish compatibility, so both the VESA pattern and installed load should be checked before the kit is specified.

Installation and Integration

The MPCD-L75U-36 is identified as a ceiling display mount and back-to-back kit. Before installation, confirm that both televisions are within the supported size range and that their mounting patterns do not exceed 723 x 501 mm. The total mounted load must also comply with the stated 300 lb rating.

Planning should account for the complete installed arrangement rather than relying on display size as the only selection factor. Verify the exact VESA measurements and relevant weight information for the intended TVs, then compare those values with the documented limits of this model. The source data does not specify product dimensions, adjustment ranges, ceiling attachment requirements, included fasteners, cable-management provisions, or finish. Those details should therefore be confirmed separately when they are material to the installation.

Performance Highlights

• Designed as a back-to-back ceiling display mounting kit.
• Compatible with documented TV sizes from 37 to 75 inches.
• Rated for a maximum mounting load of 300 lbs.
• Supports a maximum VESA pattern of 723 x 501 mm.
• Product SKU and manufacturer part number: MPCD-L75U-36.

These specifications define the model’s primary installation envelope. They make it possible to screen candidate televisions using measurable requirements instead of relying only on a general display-size category.

What Makes It Different

The defining characteristic of this kit is its back-to-back ceiling configuration. Rather than describing a mount for a single forward-facing television, the product title identifies an arrangement intended to position compatible displays in opposing directions. The named MPCDL75U, CA2, and MPE3 elements distinguish the kit configuration, while MPCD-L75U-36 serves as the listing SKU and MPN.

The combination of a 37- to 75-inch TV range, a 300 lb load rating, and a precisely stated maximum VESA pattern provides the core information needed for an initial compatibility review. No claims are made here regarding tilt, rotation, height adjustment, orientation, or other movement because those capabilities are not specified in the supplied product data.

Final Assessment

The Mustang Professional MPCD-L75U-36 is a focused choice for an installation requiring compatible 37- to 75-inch televisions in a back-to-back ceiling-mounted arrangement. Its key selection limits are a 300 lb load rating and a maximum 723 x 501 mm VESA pattern. Confirm the intended displays against all three published limits and verify any project-specific installation details that are not included in the available specifications.