UHF handheld condenser microphone transmitter- 64 Channel

The TOA WM-5225 H01 is a handheld condenser microphone transmitter in the 5000 Series UHF Wireless System. Operating across 576 MHz to 606 MHz, it combines selectable-channel operation with a compact handheld format. The transmitter is finished in dark grey and powered by a single 1.5 V AA battery, providing more than 10 hours of operation when an alkaline battery is used.

Ideal Use Cases

This model is intended for wireless microphone configurations that require a handheld condenser transmitter operating within the 576 MHz to 606 MHz UHF range. It is a practical candidate when the system specification calls for selectable frequencies, extended battery operation, and a transmitter weighing less than half a pound with the battery installed.

The published specifications list channel selection as fewer than 64 channels and simultaneous operation as fewer than 16 channels. These figures allow system planners to evaluate the WM-5225 H01 against the channel requirements of a specific installation without relying on assumptions about available capacity.

Why Choose This Model

The WM-5225 H01 brings its primary operating details together in a straightforward handheld design. Its specified transmitter power is below 50 mW, while the characteristic frequency is 32.768 kHz. A listed refresh rate of 100 Hz provides another defined technical value for comparison when reviewing system requirements.

Battery operation is a notable part of the design. The transmitter uses one 1.5 V AA battery and is specified to operate for more than 10 hours with an alkaline battery. This makes battery planning simple: only one standard-size battery is required for operation, and the published runtime provides a clear reference for scheduling battery changes.

Installation and Integration

Before integration, verify that the receiving equipment and frequency plan support operation from 576 MHz to 606 MHz. Channel requirements should also be compared with the published values of fewer than 64 selectable channels and fewer than 16 simultaneous channels. This is especially important when multiple transmitters will be used within the same system.

Physical planning is equally direct. The microphone transmitter measures 43.6 mm in diameter by 231.5 mm long, equivalent to 1.72 by 9.11 inches. Its stated weight is 180 g, or 0.4 lb, including the battery. Install the specified single AA battery and account for the listed alkaline runtime when preparing the operating schedule. No additional installation accessories or included components are specified in the supplied product data.

Performance Highlights

• UHF transmission frequency range of 576 MHz to 606 MHz.
• Published channel selection specification of fewer than 64 channels.
• Published simultaneous-channel specification of fewer than 16 channels.
• Transmitter power specified below 50 mW.
• Characteristic frequency of 32.768 kHz.
• Listed refresh rate of 100 Hz.
• More than 10 hours of operation with one AA alkaline battery.
• Handheld dimensions of 43.6 x 231.5 mm.
• Weight of 180 g, including the battery.

What Makes It Different

The WM-5225 H01 is defined by the combination of its handheld condenser format, specified UHF operating range, channel-selection capability, and single-battery power system. Rather than requiring a multi-battery arrangement, it operates from one 1.5 V AA battery while retaining a stated alkaline operating time exceeding 10 hours.

Its dimensions and battery-inclusive weight are also fully documented, making it easier to compare the transmitter with physical and operational requirements before purchase. The dark-grey finish, 5000 Series designation, and exact WM-5225 H01 model number help distinguish it when matching product documentation or planning an equipment list.

Final Assessment

The TOA WM-5225 H01 offers a clearly specified option for a 576 MHz to 606 MHz UHF wireless microphone system requiring a handheld condenser transmitter. Its fewer-than-64 selectable-channel specification, fewer-than-16 simultaneous-channel rating, below-50 mW transmitter power, and more-than-10-hour alkaline battery runtime provide the principal details needed for evaluation. Confirm frequency, channel, and system requirements before integration.