Vaddio 999-9950-200W RoboSHOT 20 UHD OneLINK Bridge System (White)

Vaddio RoboSHOT 20 Overview

he RoboSHOT 20 UHD OneLINK Bridge System from Vaddio combines a white RoboSHOT 20 UHD PTZ camera and OneLINK Bridge interface. It is suitable for use in distance learning and corporate environments. The system captures 3840 x 2160 video at 30p from a single 1/2.3″-type Exmor sensor and transmits it up to 328′ over CAT5e/6 cable. The combination enables powering the camera, sending control signals, and transmitting video over a single cable.

The PTZ camera features a 20x total zoom range with 74° angle of view at wide, with a 4.8° angle of view at maximum zoom in. The OneLINK features HDMI, HDBaseT, IP, and HD-SDI video outputs, audio inputs and outputs, and accepts HDBaseT input as well as RS-232 and Ethernet.

Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (White)

This white RoboSHOT 20 UHD Ultra High-Definition PTZ Camera from Vaddio is suitable for use in distance learning, corporate, and house of worship. It captures UHD 4K (3840 x 2160) at 30p from a single 1/2.3″ type Exmor R sensor. Featuring a 12x optical zoom, with a 1.67x digital zoom for a 20x total zoom range, the camera has a 74° angle of view at wide, with a 4.8° angle of view when zoomed in all the way.

The camera simultaneously outputs HDMI, HDBaseT, 3G-SDI, and IP streaming, so there is no concern about selecting an output port. You can control the camera from a networked computer via the Ethernet port, and an included IR remote provides local control. You can tell at a glance the status of the unit thanks to a built-in LED that changes color to indicate the state of the camera.

• The camera’s outputs are active at all times, so there is no need to select one output over another. This also allows you to output to more than one display device or recorder at the same time. The built-in IP streaming simplifies streaming your video over a network.
• HDBaseT provides power over an Ethernet cable, so you are not limited where you can mount the camera by needing an AC outlet. You can mount this camera wherever you can run an Ethernet cable. Please note that you will need a network that supports HDBaseT to take advantage of this feature.
• You can control the camera via the included IR remote commander, the RS-232 port, or the HDBaseT port.
• The camera features built-in web based interface for control via your browser.

Status Indicator LED

• Purple: boot-up and Standby modes
• Blue: normal operation and is a power on, ready condition
• Blinking blue: the camera has received IR from the remote or other IR source
• Red: tally function shows that the camera is on-air
• Blinking red: fault condition
• Yellow: firmware update is in progress

Vaddio OneLINK Bridge A/V Interface Receiver for HDBaseT Cameras (North America)

The OneLINK Bridge A/V Interface Receiver from Vaddio connects a non-USB camera and audio source, and bridges to a USB stream for easy connection to USB-based conferencing applications such as Skype for Business, Google Hangouts, and Zoom. This OneLINK Bridge simplifies installation by extending power, video, and control to your Vaddio HDBaseT camera over a single Cat5e cable up to 328′.

• Converts any conference room to a BYOD environment, delivering a USB stream for soft conferencing clients
• Connects professional A/V equipment to PC applications via USB 3.0 media stream
• Simultaneous uncompressed USB 3.0, HDMI 1.4b, and 3 Gb/s HD-SDI
• Two balanced audio inputs and two balanced audio outputs
• Control via web interface or Telnet
• Status lights

Vaddio RoboSHOT 20Specs

Key Specs

Image Sensor	1/2.3″-Type CMOS
Sensor Resolution	Actual: 9.03 Megapixel Effective: 8.93 Megapixel
Optical Zoom Ratio	12x
Max Digital Zoom	1.7x
External Recording Modes	SDI/BNC / HDMI 3840 x 2160 up to 29.97 fps
Broadcast Output	NTSC
Supported Control Protocols	IP RS-232
PoE Support	PoE++ 802.3bt

Imaging

Image Sensor	1/2.3″-Type CMOS
Sensor Resolution	Actual: 9.03 Megapixel Effective: 8.93 Megapixel
Focus Control	Autofocus Manual Focus

Exposure Control

Minimum Illumination	100 Lux
Flip / Mirror Support	Mirror (Vertical)
White Balance	Presets: ATW, Auto, Indoors, Manual, One Push, Outdoors

Lens

Focal Length	10 to 120mm
Optical Zoom Ratio	12x
Max Digital Zoom	1.7x
Field of View	Horizontal: 74 to 4.8°

Video Capture

External Recording Modes	SDI/BNC / HDMI 3840 x 2160 up to 29.97 fps
Broadcast Output	NTSC

Control

Presets	16
Pan/Tilt	Pan: 320° (-160 to 160°) at 0.35 to 120°/s Tilt: 120° (-30 to 90°) at 0.35 to 120°/s
Supported Control Protocols	IP RS-232

Interface

Video I/O	1x BNC (3G-SDI) Output 1x HDMI (Unspecified Signal) Output
Other I/O	1x RJ45 (RS-232) 1x RJ45 (LAN)

Power

PoE Support	PoE++ 802.3bt
Power Consumption	Power Supply: 12 VDC at 3 A

Environmental

Operating Conditions	23 to 140°F / -5 to 60°C at 20 to 80% Humidity
Storage Conditions	-4 to 140°F / -20 to 60°C at 20 to 95% Humidity

General

Certifications	CE, FCC, TAA, UL
Dimensions (W x H x D)	8 x 7.9 x 7.7″ / 20.3 x 20.1 x 19.6 cm
Weight	6 lb / 2.7 kg (Body Only)

Packaging Info

Package Weight	11.2 lb
Box Dimensions (LxWxH)	13.5 x 13.5 x 11.8″